Tarm's pressurized storage solution

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

MrEd

Feeling the Heat
Hearth Supporter
May 9, 2008
426
Rural New England
Anyone heard any details about an upcoming pressurized tank/solution from Tarm? When I picked up my Solo 60 a few weeks back, the sales rep said it was going to be just a matter of weeks before they had a pressurized solution available for sale..mostly in response to the huge increase in copper. Said it would be more or less like a propane tank in how it works, but all pre-plumbed with the correct fittings for an easy install...Anyone else hear something similar?
 
Called the people at Tarm and asked if they will be offering any storage soon. They said no. Nothing in the works. Just the STSS products.
 
Funny...the guy I talked to definitely said a solution was in the works, and would be out soon....
 
MrEd, - That would really solve alot of problems. As you can see from many recent posts, seems like everybody is interested in storage. Can you remember who you spoke with. I always spoke with Chris or Renee in N.H
 
Didn't want to post his name publicly so as to not embarrass him if he was either wrong, or let something slip that he shouldn't have - but I sent you a Private Mail with his name.
 
If you have a tarm or any boiler you can go out & buy a new steel 500 gallon tank that's meant to be installed on a closed looped, pressurized system from any plumbing supply house for less than you'll pay for a stss tank. You can use a propane tank if money is the object. You don't need to wait for the Tarm solution.
 
I understand Tarm may offer a pressurized storage tank in the near future. From what I can gather it will be a tall cylinder rather than a big diameter unit. They are thinking that way to fit through doorways.
If you have the head-room, 8' or more, I think this may be a good option.
 
I live about an hour and 15 minutes from Tarm USA, and as part of my "due diligence" for my likely scheme to put in a wood gasifier and storage (to replace my oil/wood/warm air) I went to look at their stuff first hand. In their area that they have set up for demonstration & testing, they had a couple of huge, tall, not-yet insulated pressure tanks (not yet connected) near the STSS tank. they said that pressure vessels are the norm in Europe and that when the European principals of the Tarm operation have come over here, they've thought that all the coil-open tank rigs looked like weird science experiments. But it sounded like the off-the-shelf pressure vessels were definitely still under development and well down-the-road in terms of retail availability. they're also too tall for my old house cellar with a 6.5-7 ft basement ceiling height, so my analysis of their option for this ended there; still looking into open vs presurized storage and how to build something that's as cost-effective, thermally efficient, and trouble-free as I can scheme up.

Trevor, near Montpelier, VT
 
pbvermont said:
I believe Jim Nichols would have the definitive word on this subject.

Jim and Llyod both passed away in the last years Scott Nichols is now in charge up at tarm
 
Status
Not open for further replies.