1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

Thermostat Question

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by Jester, Sep 19, 2008.

Thread Status:
Not open for further replies.
  1. Jester

    Jester New Member

    Joined:
    Aug 19, 2008
    Messages:
    206
    Loc:
    Seacoast Massachusetts
    Afternoon All.
    Still working on the instal of my P36 Harman. Ive got the wall removed where its going to go (My house is a Cape. There was a wall with a built in hutch seperating the living room and dining room, that is the new home for the stove)
    The question I have for today is regarding thermostats. First of all, has anyone put one of these stoves on a thermostat. From what I can understand is that when you run it in this mode, it runs wide open when the unit calls for heat, then throttles back to an idle in the meantime. The First question Ive got is, is it worth it to go to thermostat mode or just get the feed and fan comfortable and leave it? Question number two is regarding the use of remote wireless thermostats. Anyone ever used one, and if so what were your results?
    This is the model I am looking at : http://ourworld.compuserve.com/homepages/rciautomation/p1.htm
    I kinda like the idea of being able to control the heat from my bedroom (upstairs from the stove) as needed.
    THanks all and have a good weekend
    Eric

    Helpful Sponsor Ads!





  2. thekid_1

    thekid_1 New Member

    Joined:
    Jun 11, 2008
    Messages:
    35
    Loc:
    Upstate NY
Thread Status:
Not open for further replies.

Share This Page