• Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Quadrafire Transition fitting
M

Quadrafire Transition fitting

I have a mid-80's Quadra Fire 4100 that is running out of air when I close the main damper. I have tuned up the stove all I can, everything that I can reach is clean and or replaced, including stovepipe/chimney/topper, brick, door gasket, under stovepipe in the roof of the stove, and wherever I can run a shop vac inside and out. It is the main damper lever that is center/front on floor level of the stove that is closing off the air flow when I pull it all the way out, both dampers operate smoothly and easily. Any ideas out there?
 
Seems to be a matter of simply leaving the damper open a bit when firing.
When you start a fire the damper should be all the way OPEN.{inwards}....throttling it down [pulling] as it heats up.

PaulAnton.
 

Media information

Category
Wood Stoves
Added by
mm norcal
Date added
View count
2,500
Comment count
2
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Apple iPhone 7 Plus
Aperture
ƒ/1.8
Focal length
4.0 mm
Exposure time
1/10 second(s)
ISO
100
Flash
Auto, did not fire
Filename
IMG_2771.jpg
File size
73.9 KB
Date taken
Thu, 21 March 2019 5:04 PM
Dimensions
480px x 640px

Share this media