englander 25-pdvc

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
  1. F

    Englander 25-pdvc control issues

    Hello all, new member but I've been reading for a bit. I have a 2021 model 25-pdvc I bought second hand and installed in the house and I can't adjust any of the settings on the lower 3 buttons. It burns fine but I wanted to get it dialed in a little better to the pellets I'm using but the...
  2. R

    25-pdvc upper auger not getting power

    The upper auger on the pellet stove stopped working so we replaced both motors today. It’s throwing an e2 code. When he hooked the wires from the bottom motor to the top motor it worked. It seems the top motor isn’t getting power from its own wires, what could this be???
  3. S

    Stage 3 creosote.

    Hey guys having problems with my englander 25 pdvc. I have what I have researched to be creosote level 3. ( looks like tar ) everywhere inside the unit. The exhaust fan, piping, burn box. It ain't good. Will creosote remover help? I'm trying to get it clean so it will actually light instead of...
  4. S

    25 PDVC Englander settings

    I am still looking for the 3 settings LFF, LBA and AOT on the Englander 25 PDVC Mfg. 10/08. HELP! Thanks, Skip H
  5. M

    Englander Low Fuel Speed

    Hi all I have a 2005 englander 25-EPI and the lower 3 settings LFF, LBA and AOT will not allow me to change any of them for some reason? I recently swapped boards with the original one as my brother in law had got another stove and took the board from mine due to wiring and solder issues, long...
  6. T

    Adding limit switches to a stove that didn't have them from the factory

    I have an Englander 25- PVDC. I want to add High and Low limit snap switches to it in addition to the vacuum switches currently in place from the factory. These are the switches that I got the add to the system: low limit switch, high limit switch. I have noticed that many stoves have these...
Top Bottom