I have a Quad CB 1200-I. Love it. Just redid the wiring harness as I had a short in the system and it was just easier to replace the harness. Everything works beautiful. So here is list of new parts. Wiring harness, themalcouple, ignitor,control box (last year) now have the clear, vacum switch. So i get this all together and she fires right up. Problem now is Auger keeps jamming. Starts up perfect and after a few mins the Auger will stop and stove goes out. Door gasket is fine, vac switch is new and snap disc is good. Help, I know this stove pretty good and I am stumped. In addition, does anyone have a guide for pulling the auger so I can check it out for a jam or something lodged. Again it runs for a good 20 to 30 mins and then stops. And using the same pellets I have used for 10 years. Stumped.