I take outside air in thru a 4 inch dryer tube. It goes in a hole in the bottom back of the pedestal. I would like to add a small, low wattage combustion blower
,maybe 30 watts, to help get the fire going and revive the common dead smoky fire. I would put it on a little hand timer just to get things going, 5-25 minutes max.
There may be someone here who has done this. Should I put a Y in the intake tube and attach there..???As long as the angle is steep towards the stove ,I thought
it would work and avoid the bad scenario of causing a secondary air flow back up the 4 inch tube towards the outside. This could be dangerous if any embers
got going the wrong way. Any engineers on the board who have ideas and have done this,..??? thanks
,maybe 30 watts, to help get the fire going and revive the common dead smoky fire. I would put it on a little hand timer just to get things going, 5-25 minutes max.
There may be someone here who has done this. Should I put a Y in the intake tube and attach there..???As long as the angle is steep towards the stove ,I thought
it would work and avoid the bad scenario of causing a secondary air flow back up the 4 inch tube towards the outside. This could be dangerous if any embers
got going the wrong way. Any engineers on the board who have ideas and have done this,..??? thanks