breckwell big e control board repair

[huggmeister]

Hi guys,
I have a big E I was just going to sell to a guy until I noticed the Breckwell "ghost in the machine" auto starts were happening and the combustion blower wont shut off. I cant sell this to anyone in good faith until I get it right. Does anyone know which circuit board parts have to be changed to get this going again? I read somewhere something about triacs that could be replaced possibly.

Thanks for any advice, Tim

 

[flybmw02]

Hi guys,
I have a big E I was just going to sell to a guy until I noticed the Breckwell "ghost in the machine" auto starts were happening and the combustion blower wont shut off. I cant sell this to anyone in good faith until I get it right. Does anyone know which circuit board parts have to be changed to get this going again? I read somewhere something about triacs that could be replaced possibly.

Thanks for any advice, Tim

I would send the board out for repair before I spent $300+ for a new board.
Good luck with it.
John (broken link removed to http://www.ebay.com/itm/Pellet-Stove-Control-Board-Repair-Service-/190799433103?pt=LH_DefaultDomain_0&hash=item2c6c884d8f)

 

[huggmeister]

Hi John,
Any experience with this guy and is he reasonable?

Thanks, Tim

 

[flybmw02]

Hi John,
Any experience with this guy and is he reasonable?

Thanks, Tim

Hi Tim
No I have not but if you read his feedback on repairs he has done I think he's the stand up guy
John

 

[Roadstar]

I have a '94 Breckwell P24I that has an analog control board.

When the board went bad I sent it to David and was satisfied with his work.
Quick turnaround. Send him an e-mail and see if he can help you.

Control Board Repair

David Boyce
[email protected]

[email protected]

Skype: pcbrepairs

YouTube:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Mt Bob]

It probably just needs new electrolytic capacitors,but if you have never done board work reccomend send it out.Never heard anything bad from these guys mentioned above,and Joe in calif.(pelletstoverepair.com) is excellent.