Breckwell P24i-control panel problem

[retainingwall]

I have a 2001 P24i, serial no. 9453259,that has power to the control panel but the panel doesn't work. I had the #2 light blinking and I had the stove apart to check it out. My son moved the side with the control panel and it shorted out. I replaced the fuses, but I am still not getting anything out of the panel. I checked to see if there is power getting to the panel with a volt meter and it is getting power.Since I have no power, I can't figure out why it won't start. Before this happened, I would have to push the start button several times to get the stove going. Is there any way to test the control panel itself or is it toasted?

Before the panel was shorted out, I replaced the door rope to try to cure the #2 light, but that didn't help. As I said above, I can't get to this problem until I get the control panel working. Any suggestions?

 

[Lake Girl]

See if these folks can repair ....

http://www.ebay.ca/itm/Pellet-Stove-Control-Board-Repair-Service-/190799433103
Good luck!

 

[Roadstar]

I'm not sure if David is still repairing control boards but you could send him an e-mail and ask. He repaired one of my Breckwell analog boards a few years ago. Turnaround was quick, about a week, and the price was about $120.00.
The board works great.

Here is the information I have:

Control Board Repair
David Boyce

[email protected]

[email protected]

Skype: pcbrepairs

YouTube:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

I contacted him at his gmail account.

Good luck

 

[retainingwall]

I'm not sure if David is still repairing control boards but you could send him an e-mail and ask. He repaired one of my Breckwell analog boards a few years ago. Turnaround was quick, about a week, and the price was about $120.00.
The board works great.

Here is the information I have:

Control Board Repair
David Boyce

[email protected]

[email protected]

Skype: pcbrepairs

YouTube:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

I contacted him at his gmail account.

Good luck

Thanks for the info