This thread is regarding my cab50 stove which was installed 10/2015 and manufactured 10/2012. Everything works fine but starting this season I have been noticing some smoke smell . Once there was even a puff of smoke from the door area upon combustion. I verified the door seal with the dollar bill test and it's tight. Upon close inspection of the glass seal it looks like there is not any seal across the top and bottom. Is this an air wash feature that I have read about? Or should the glass be completely sealed. Searches did not reveal any specifics
Cab50 glass seal
- Thread starter nom de plume
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
johneh
Minister of Fire
Air wash.
Other than start-up smoke can only leak after the combustion fan
So from the fan to the top of the chimney is where the leak is
Fan gasket
pipe connections
Other than start-up smoke can only leak after the combustion fan
So from the fan to the top of the chimney is where the leak is
Fan gasket
pipe connections
Similar threads
