Chimney make/model links?

[Gotrek]

I'm new, and sorry if this is posted in the wrong section. I've been searching here for a while now but I must not be using the right key words... And I'm sure this has been asked a lot to I appologize in advace.

I've got a couple chimney's I'm trying to ID so that I can hopefully buy needed replacement pieces. Does anyone have a link to a Chimney ID guide? For Stainless steel Class A chimney.

I'm 90% sure one is a GSW brand chimney and the other Probably some ancestor of the duratech lines... Or metalbest.

 

[DAKSY]

Most manufacturers put stickers on their components for labelling individual sections.
If yours are too old & there are no ID stickers, you could always post some pictures.
That will possibly make the identification a little easier.
Sometimes just the connection configuration between sections is enough to ID them.

 

[Gotrek]

Most manufacturers put stickers on their components for labelling individual sections.
If yours are too old & there are no ID stickers, you could always post some pictures.
That will possibly make the identification a little easier.
Sometimes just the connection configuration between sections is enough to ID them.

Ok I will get some I assumed someone might have a website all done up for this type of issue

Thanks for the reply I appreciate it!

 

[Gotrek]

Ok I will get some I assumed someone might have a website all done up for this type of issue

Thanks for the reply I appreciate it!

Here we go.

First one Which I think is GSW brand,

 

[Gotrek]

Second one, which if it helps has odd lengths. That pipe for example is about 29" Every pipe I have is an odd size (ie not 12, 24,36, 48")

 

[Heatsource]

good ole metal bestos

 

[Gotrek]

Ok perfect thank you! What was their reasoning with using odd lengths?