So I’ve have the stove for about a year. It worked grate until I did a total clean. I did everything I was supposed to cleaned all the sensors (esp) and all that good stuff. When I put the stove back in and turned it back on the screen reads the the door is open. I’ve checked the gasket it’s fine. It won’t ignite because of this it also says that the pressure switch is open. Could some one help plz? My wife is also currently pregnant and super emotional so the cold doesn’t help!
Door open error
- Thread starter Ruto
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Mt Bob
Minister of Fire
95% of the time,people do not get the "fines box" cover back on properly,or get dirt on the sealing surface of the gasket.
I must of taken that apart and cleaned it 200 times today I also changed the door gasket but no bueno! I ordered a pressure switch I don’t know anymore I went wire for wire and made sure everything was where it’s supposed to be
Try unplugging it to make sure the error clears. Sometimes a knob might be slightly turned so the code won't clear.
Yah it gets unplugged whenever I pull it out it’s an insert I must of done that like 15 times! This thing is driving me nuts!