I just hooked up a 2005 Englander 25 about a week ago, the first time I hit the start button it fired right up, 2 days later, it E2 on the first start up try, I cleaned the pellets out of the burn pot and tried again and it started. I saw smoke within 5 min. or so then some sparks and then fire, now, 3 days later, the igniter wont get hot on the tip and it wont ignite the pellets. I touched the housing that the igniter is in in the back of the stove and almost burned my finger. After it cooled I took the igniter out and hooked it to a lamp cord and within 10 seconds 80% of the shaft was cheery red but not the tip but I unplugged it figuring it was fine. I then installed it back in and now its on its 3rd restart and nothing, housing is super hot but tip wont get red hot. I took the air hose out and that was clear, also stuck a nail where the air tube goes onto and that was clear. Anybody have any ideas?
Thanks.
Thanks.