Enviro Meridian 1 stopped working

[Evancool270]

Hello everyone,

First year with a pellet stove. Picked up an enviro meridian 1 insert used, and have used it from October until today with no issue. All of a sudden tonight it was burning away and went into its cool down cycle and stopped working. No lights on the control panel are lit. When I unplug from the wall and plug back in the mode light stays lit for about 3 seconds and then I hear a click and everything is dead again. I have checked power to the control board and the fuse.


Any ideas?

 

[clancey]

Looks like a pretty large stove to me and I like the design..This is what I scratch up on the net..
I hope the other forum members can help you with the pellet stove...clancey

Enviro -Product

 

[Evancool270]

Thanks clancey, yep that's the stove. Hopefully someone will have some ideas.

 

[johneh]

What happens when you push the start button
anything?
Manual here

https://enviro.com/custom_content/docs/manuals/C-14439%20Meridian-1%20Technical%20Manual%20R1.pdf

 

[Evancool270]

After the mode light is illuminated for about 3 seconds and goes out none of the other buttons do anything and they do not illuminate.

 

[johneh]

If the fuse is good and power is getting to the control board
I would say that the magic smoke has been released
Chech the board tracers for burnt or dark brown spots
also, burn or melted components.