Finally , it's back home !

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
N

Nixon

Minister of Fire
Hearth Supporter
Aug 6, 2008
698
West Sunbury ,Pa.
The 346XP ( oe) that is .it spent a bit of time in Tenn. . She's pretty snotty for a 45 cc saw ,lots of compression ,and the throttle response is " right now ! " . To make the day complete ,I found a new ( to me) Stihl dealer today !
(The old one has just gone down hill too much .) So, I ordered the 5 ' cant hook in Stihl colors .
Been a real good day. And yes , I know the bylaws .... Pics , or it's fiction . As soon as I find the camera, I'll post some pics . :)
Now to scheming my next saw . MS 661 ,or 395 XP . At any rate, I've got time to decide that as the 661 won't be released for a while yet. That ,and a medical issue that I need to resolve before I cave to the CAD and modding bug again .;)
 
  • Like
Reactions: smokinj, Dairyman, MasterMech and 1 other person
I seem to be catching a bad case of that myself. Had one crappy saw to my name in February, now I have six. Somehow it still isn't enough.

Why was the saw in TN anyway?
 
  • Like
Reactions: Nixon
pyroholic said:
I seem to be catching a bad case of that myself. Had one crappy saw to my name in February, now I have six. Somehow it still isn't enough.

Why was the saw in TN anyway?
Click to expand...
Porting ,muffler modding , and putting a 357xp carb,filter ,and intake on it .
 
  • Like
Reactions: ScotO
NIIIICCCCEEEE!!! I was sure hoping that was the reason. Why can't we just leave well enough alone? Well because nothing still in factory trim is "well enough"
 
  • Like
Reactions: ScotO
gregbesia said:
Just curious , how much did that cost ?
Click to expand...
The porting ,and Muff. Mod are $ 250 + shipping . That's pretty much the standard price no matter which builder you select .
I can't give you an accurate price for the. 357xp carb ( hd 199 ) ,intake,and filter as it involved some bartering .
But, I'd say $400 or less excluding shipping . To be honest , if you are thing of doing a 346 , you likely won't need to do the carb ,intake thing . I had my 346 done a little hotter than an everyday work saw ,so I figured the 357 carb might help .
 
  • Like
Reactions: ScotO and pyroholic
A 45cc saw with the right chain ,and U R, doodle noodling, doodle do ==c
 
Sorry for the delay, but here's the Pics .:cool:
[Hearth.com] Finally , it's back home ! [Hearth.com] Finally , it's back home ![Hearth.com] Finally , it's back home ![Hearth.com] Finally , it's back home ![Hearth.com] Finally , it's back home !
About the only thing that gives it away as not stock is the MM and the decal, that and it's a touch louder .
 
  • Like
Reactions: mikefrommaine, smokinj, ScotO and 3 others
Edit ..... Found a new Stihl dealer last week , they are great to deal with . My old dealer had just gotten to the point that I hate going there . At any rate I ordered that 5 ft can't hook that i've been lusting after. When it comes in , I think I'll treat the 346 to a couple of rm and rs chains .right now I've got WP and carlton . Don't care fot the Carlton that much for some reason it vibrates more than other chains . CAAD is good !;)
CAAD---------- chainsaw accesories aquisition disorder.
 
  • Like
Reactions: ScotO and Dairyman
Just curious, why buy a 45cc saw then spend that kind of money hot ridding it? Why not just buy a bigger saw to begin with?? I mean I know weight is a big thing as I have a sthil 390 modded and a 445 unmodded but the small saw is way lighter as its smaller.
 
Why buy a saw like that then spend that kind of money to make it like a larger saw?? I get the weight thing but??? That kind of money? I would definitely do the muff mod though.
 
Didn't know it posted so I retyped it. Stupid tapatalk phone app!
 
Clem, maybe he just wanted a lightweight saw that kicks azz.....and after having that saw "Masterminded" (he knows what I'm talking 'bout), I'm sure he has a chit-eating grin on his face that you couldn't slap off if you tried.....

Randy (AKA Mastermind) is to chainsaws what Carrol Shelby was to muscle cars......literally......
 
Clems, everyone needs a hobby , this ones mine . Cheapest than cars, boats planes ,and womens !:)
If you get a chance to run a dec ently modded saw , you'll get they idea . All mine are done but the 550 and 562 xp .
When i decide between the ms661 and 395 xp they will go to mastermind .
 
  • Like
Reactions: mikefrommaine, ScotO and MasterMech
Where is the Sticker??? I don't see it? (Edit never mind. Was looking for Randy's stick because of the name mentioned Bove. I see it Terry's sticker on the side)


And as for buying a small saw and not buying a larger saw??

clemsonfor said:
Just curious, why buy a 45cc saw then spend that kind of money hot ridding it? Why not just buy a bigger saw to begin with?? I mean I know weight is a big thing as I have a sthil 390 modded and a 445 unmodded but the small saw is way lighter as its smaller.
Click to expand...

That's simple. I'd put that 346 against your 390 any day. That's almost 20cc less motor. Run a ported 50cc saw and your smile couldn't be wiped off your face. Or any saw for that matter.

Nixon- I seen your thread on "AnotherSite" and loved it there. Some people get it. Some don't. Ported Pro saws. Only way to roll ;)
 
  • Like
Reactions: Nixon
Oh I'm sure it cool and fast!! That's just a lot of money. Since I modded the muff this 390 is a beast! A heavy beast but still will chew some wood. I wish I had an 18" er instead of the 20 for it.
 
clemsonfor said:
Oh I'm sure it cool and fast!! That's just a lot of money. Since I modded the muff this 390 is a beast! A heavy beast but still will chew some wood. I wish I had an 18" er instead of the 20 for it.
Click to expand...
Well, You're right in the sense that it cost money to play with these things . What hobby doesn't? This one heats my house , gives me exercise , and hours of enjoyment . In addition to the seven saws, I have probably 10 different chain sharpening systems (including a ATOP ,and Timberline )plus anything else that looked interesting . Probably have 60-70 chains that are maintained sharper than out of the box . There's nothing more relaxing to me than at the end of the day than putting the saws on the bench ,giving them A thorough cleaning ,servicing,and bring the chains up to spec. Each saw has at lest two bars ,etc, etc...... Yup it's called CAD , and I love it !
I don't hunt , fish , own a boat ,or anything else that could be called a money pit ( other than CAD ) .
Everything i own is payed for , so i indulge myself this one hobby . CAD is good ,resistance is futile ! :)
All the best, John
 
  • Like
Reactions: mikefrommaine, Dairyman, gregbesia and 4 others
Well I do all those! I fish but not as much a. 10 yrs ago. So I spend almost no time or no eyes on that. I hunt and reload so there is money. I have 2 boats, 2 trucks, ATV, tractor, farm property to maintain, a new baby on the way!!!!!! Excited! Love saws only recently have 2 only 5 serviceable chains between the 2 and only the bars they wear. Would love more but as u note. There other things that take my time and money!
 
  • Like
Reactions: Nixon
" no eyes"??? Stupid phone!!
 
CAD doesn't have to cost money. I've got 8-9 runners right now, five of them are 'pro' saws. Six if you count my DIY ported 359.

Total investment?

They are all FREE to me since I've made money buying and selling my saws. And that includes mileage, parts, chains and even the specialty tools I bought. I could send most of them out to be ported with the money I've made this year buying and selling. But I enjoy doing the work and am just starting to grasp all that goes into porting.
 
  • Like
Reactions: Nixon and Boog
clemsonfor said:
a new baby on the way !!!!Excited !!
Click to expand...
Missed that part ! A blessing to You and your bride ! Congratulations , hold that new child near and dear . They grow up quicker than one might imagine . All the best , John
 
  • Like
Reactions: clemsonfor
Thanks we will. We have been through a lot. He is truly a gift from god!:)
 
  • Like
Reactions: Nixon
Status
Not open for further replies.
Top Bottom