I run my P43 on room temp Manuel. I Set it to the "Off" position this morning to clean it and it wouldn't shut down. Tried switching the toggle to auto and it still didn't shut down. I opened the hopper and began removing pellets by hand and noticed that it was finally shutting down. Never happened before. 6th season for the stove. Any thoughts ? MM
Harman P43 won't shut down.
- Thread starter Mikey708
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Harman stoves will not shut down until the ESP in the exhaust stream reads 90
. It does not happen too quickly.
Can take 1/2 hour or longer.
. It does not happen too quickly.Can take 1/2 hour or longer.
Thanks D. It ran over an hour after I switched it off with a full flame and continued feeding no sign of shutting down until I opened the hopper and began removing pellets. I know it stops feeding when the hopper cover is open. I've been using the stove for 6 years. Never happened before. But I think your right , it may have something to do with the ESP sensor. I think I'll try removing and cleaning it.Harman stoves will not shut down until the ESP in the exhaust stream reads 90
Can take 1/2 hour or longer.
Similar threads
