Replacing the circuit board on a Harman Invincible Insert bought in 2002. Ordered a new circuit board 1-00-06142 which my Manuel calls for but there is no place to plug the feeder micro-switch into. Also don’t know which switches to turn on or off. Any help would be much appreciated.
Hartman Invincible Insert circuit board replacement
- Thread starter jwages
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Which model do you have?
invincible T or invincible RS
You do not need the micro switch with the new circuit board.
The Off position is on the lower right knob and is between Stove Temp Mode bottom and Room Temp mode Top at the 9 O’Clock position.
See pic below where it shows OFF.
Click on pic to enlarge.
invincible T or invincible RS
You do not need the micro switch with the new circuit board.
The Off position is on the lower right knob and is between Stove Temp Mode bottom and Room Temp mode Top at the 9 O’Clock position.
See pic below where it shows OFF.
Click on pic to enlarge.
Thanks for the info. Since I posted the thread I have received information that fixed my problem. The new control board had the dip switch #5 turned on when it should have been in the off position. Thank you.
Similar threads
