Heat and Glo 6000c-IFT

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
H

Hermantrick

New Member
Aug 20, 2023
1
Ohio
My health and glo 6000c-ift wou
d not let me change the fire levels so I shut it off. Took the batteries out of the remote and it started on it own. What could be the problem
 
Check the module underneath the firebox. The on - off - remote switch may be in the on position. It needs to be in the remote position. If it is in the remote position & the fireplace comes on by itself, it may be responding to the thermostat. Check to see what temperature it is set at.
 
Could very well be turned on via wall switch which will not allow the remote to interact with the module
 
You must log in or register to reply here.

Similar threads

S
Missing Flue Restrictor - Heat & Glo 6000C-IPILP
Replies
2
Views
360
It's a Gas!
Slicker
S
P
6000tr-oak DV blocked orfice?
Replies
6
Views
202
It's a Gas!
DAKSY
DAKSY
H
Heat N Glo direct vent 6000TRB won't light, control module discontinued
Replies
2
Views
315
It's a Gas!
Hosenemesis
H
LAndrim
Heat -N- Glo Tiara II will not switch on
Replies
2
Views
1K
It's a Gas!
LAndrim
LAndrim
M
Main burner won't light anymore. Before was intermittent and fixed by shaking surround. Thermopile: low volts when switch on, good volts off.
Replies
5
Views
1K
It's a Gas!
Mcburger
M
Top Bottom
Back