Help with Husky Carb Limiters

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

El Finko

Member
Aug 22, 2012
161
Mason Dixon Line
I thunk that my saw (455 Rancher) had the limiters removed, but I guess I didn't know what I was looking at.
Anybody have a step-by-step on what I'm looking at and how to remove the limiters?
I know I've read somewhere about a drywall screw trick, but my brain hurts at this point in the evening, and I'm hoping for some relief.
Help me guys....
 
Any chance you can remove the cover/covers and expose the carb where the limiters are or should be? Take pics and post them here and we should be able to tell you if the limiters have been removed. If they have not, someone may be able to chime in that has done it on a 455 before. I did it to my 395XP, but that has a completely different carb.
 
  • Like
Reactions: TreePointer
I,have seen were their was epa plug pressed in, Ya drill a hole in the plug and run a drywall screw in so you can pull them out. The ajustment screw is under the plug. Sound about right EF Jay
 
That's along the lines of what I remember reading. I'll take a picture and post it.

I thought I was turning the adjustment screws, but the plugs themselves are slotted to fit a screwdriver for (limited) adjustment, right?
 
Status
Not open for further replies.