can somebody post a picture of what you are using for a hx brush. I would like to use one like a pellet stove brush on a rod but I am not sure it would get the job done. I am only trying to remove fly ash from the tubes as there is no creosote and would like to speed up the process. I currently have a clumsy wire wheel setup that attaches to a drill. Thanks
Hx flue brush
- Thread starter Woodman1
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
salecker
Minister of Fire
What unit are you trying to clean?
I have a tool that i made,because i couldn't find anything that worked.
I bought a 2" tool from McMaster,which didn't work for my application,i would sell that one.
My boiler has 2" tubes
I have a tool that i made,because i couldn't find anything that worked.
I bought a 2" tool from McMaster,which didn't work for my application,i would sell that one.
My boiler has 2" tubes
salecker
Minister of Fire
Check out my thread Cleaning Econoburn 200 flue tubes that i posted years ago
I looked to try and find my pictures of the tool i made,but it was quicker to find my thread.
I looked to try and find my pictures of the tool i made,but it was quicker to find my thread.
Similar threads
