Need a Warm Morning pilot assembly

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Frankenauger

Member
Oct 12, 2018
3
Green Bay WI 54313
Hi, I'm new to posting on this forum, thanks for letting me join. I have an old 65,000 BTU Warm Morning Propane heater that I use in my cabin, model # V-65 CMAB, serial # 14081. The pilot light started leaking so the pilot flame is no longer directed at the thermocouple but rather burns out of the leak much lower than it should. I'm trying to find a new pilot light assembly but haven't been able to find one. Can anyone tell me where or point me in the right direction? I can find many water heater pilots, and a lot of "universal" pilots but not one specifically for this type of heater. So will one of those pilot assemblies work on this heater. Hopefully these pics will help. Thanks for any help and advice you can give.

20231101_100210.jpg 20231101_100228.jpg
 
Last edited:
Well here are some pics of my Warm Morning pilot and thermocouple. The inner, very thin metal where the pilot orifice is inside the pilot was disintegrated so I know that's trash. The thermocouple looks good and that wasn't the problem anyway. The number "C 10" is stamped on the pilot bracket. It appears to be a 3/8" connection to the pilot supply line. So the question is, is there a universal pilot or perhaps one from a different appliance that would work? Thanks for the help.

20231201_140549.jpg 20231201_140551.jpg 20231201_140820.jpg 20231201_141021.jpg 20231201_142423.jpg