Good afternoon all! I recently decided to replace my old pellet stove with a new one. I currently have a pipe vented out through my house, but the new stoves pipe doesn’t line up. The pipe through my wall is 16” from the ground and the pipe in the stove is only 8” from the ground. Is there any way to connect these so I don’t have to put a new hole in my wall? Thanks for your help
New install problem
- Thread starter Lstickney
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
You can connect your new unit using the existing venting location,
probably with a couple of elbows & a short straight section.
Your unit may be further from the wall, however...
probably with a couple of elbows & a short straight section.
Your unit may be further from the wall, however...
