Not burning properly

[dale hallamn]

I have an englander 25 pdvc and because of no other choice I had to get a ton of inferno pellets and they are burning horrible the ash is coming out in one piece instead of being light and fluffy like all the privious pellets I used I'm currently set at 4 5 1r can I adjust to get them to burn better

 

[R-G]

I had to get a ton of inferno pellets and they are burning horrible

Oh man that suks, you would get more heat from burning candles.

 

[smoke show]

try to mix em with better pellets. infernos get terrible reviews here.

 

[DneprDave]

Maybe you could mix the infernos with a little diesel oil?

No, please don't do that!

Dave

 

[dale hallamn]

Well let me jump on the infernos suck band wagon I'm new to the pellet stove and am not sure about making adjustments but if they suck they suck what are you gonna do

 

[CT Pellet]

can I adjust to get them to burn better

Sorry Dale, I know it's not what you want to hear, but you just can't make chicken salad out of chicken chit.

 

[imacman]

Raise the lower button settings to 5-6-1 and see if that gives you more heat. Might even try 6-6-1.

As far as the Infernos, the only other solution was what Smoke Show mentioned....get a ton of good pellets and mix them 50/50. Doing that will probably allow you to re-adjust the lower buttons back.

Once the "Inferiors" are finally burned up, you can lower those setting back close to the original.

 

[SmokeyTheBear]

I'd go the other way imacman, less crud more air.

 

[kenstogie]

I have North American's from HD which quite frankly also suck. I have been having pretty good luck mixing them with Somerset "Wild WIld Awesome Stallion" Pellets.