Piazzetta Monia error code

[Briadog]

The stove will successfully execute the start phase but then errors with code "NO LIGHT" . I have run the tests, auger, fan, exhaust fan, and igniter. All were fine. I also cleaned the pressure switch tube to clear out any ash. I'm now thinking its the temp switch in the exhaust that verifies a successful light.
Any ideas or suggestions are welcome

Thank You, Brian

 

[Katia]

Hi Brian, how did you fix your issue? We just bought Piazzetta stove a few weeks ago and now it shows " NO lighting E9" error.

 

[Briadog]

Hi Brian, how did you fix your issue? We just bought Piazzetta stove a few weeks ago and now it shows " NO lighting E9" error.

Hi Katia, I have a service tech coming on the 11th, I think it’s the board because I replaced the exhaust sensor, jumped the vacuum switch and cleaned the vacuum line.
My suggestion is to do a thorough cleaning, be sure to clean under the fire box. The instructions have a good troubleshooting guide.
Good luck, post what you ended up doing, I’ll do the same.

 

[Katia]

So the service tech came yesterday and replaced a few things that he thought could cause the issue. However, the stove still showed E9 error code. He ended up ordering a new board, he said it didn’t recognize any codes/commends that he was trying to do. I hope the new panel board will turn my stove back to life. I really enjoyed it for the short 3 weeks we’ve used it.….