Pipe pricing for Quadrafire Castile pellet stove installation

chrisjchrisj

New Member
Sep 9, 2020
2
666666
I am looking to find alternative pipe pricing for Quadrafire Castile pellet stove installation. Quadrafire dealer pricing seems much too high.
I would imagine the exact same pipe exists on the market somewhere. Can you help me with this?
 

Washed-Up

Burning Hunk
Nov 5, 2011
208
Kananaskis,Alberta, Canada
Exhaust piping? Size and lengths? Post is a bit vague.
 

chrisjchrisj

New Member
Sep 9, 2020
2
666666
Exhaust piping? Size and lengths? Post is a bit vague.
Thanks for your reply.
I have read this regarding 'horizontal venting for a pellet stove' "The vent pipe is connected to an adapter at the back of the stove, then run out through the wall adapter plate to a distance of at least six inches from the exterior wall" and "If installing your pellet stove venting at 2,500 feet or more above sea level, you definitely need four inch pipe". I am at 2400 ft elevation. So, I believe I may need 2ft of 3" pipe and connectors. I have framed-out the spot for the Castile-I-MBK-C insert , as per the manual instructions. (My previous Whitfield pellet stove pipe used a 3" straight pipe thru the exterior wall, with 12 inches outside and a 45 degree elbow pointing down, which worked well in this location for decades). Is there a quadrafire pipe venting kit # that would include two feet of 3" inch pipe and connectors (maybe an elbow), for installing the stove's horizontal exhaust piping? Or is there an aftermarket kit for this?
 

Washed-Up

Burning Hunk
Nov 5, 2011
208
Kananaskis,Alberta, Canada
Not sure you’ll find an exact kit for your desired setup, Mountain View products has been good to order from for me and has a good selection