Stove fires up on original start,burns until thermostat shuts it off,when temp drops it will relight and run till temp is up.....this when the problem occurs...stove blower & auger start but wont relight.burn pot has plenty pellets but will not ignite...i empty burn pot hit reset button stove will fire up...very comfused.
QUADRA-FIRE 1200I WONT LIGHT AFTER 3RD CYCLE..
- Thread starter yulanchief
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Ssyko
Minister of Fire
Mikey pellet guy
Member
Thermo coupler? Or try adjusting your flame height inside your hopper, flame should be 6 to 8 inchs above burn pot.
cleaned the stove again..scrubbed burn pot with wire brush...checked the igniter...adjusted feed gate...stove burned off & on all night..so i guess something was dirty.
Similar threads
