Question About Early Fisher Wood Stove Insert

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

jmbuckley

New Member
Nov 29, 2016
1
adirondacks
[Hearth.com] Question About Early Fisher Wood Stove Insert [Hearth.com] Question About Early Fisher Wood Stove Insert [Hearth.com] Question About Early Fisher Wood Stove Insert [Hearth.com] Question About Early Fisher Wood Stove Insert [Hearth.com] Question About Early Fisher Wood Stove Insert [Hearth.com] Question About Early Fisher Wood Stove Insert Hello, I am a new member and this is my first post. I just picked up this Fisher Insert and am ready to install it in my house. This is the older style with a chain to operate the damper. I noticed the previous owner put this 6" insert boot over the original 8" opening for their application. I removed it for my application as I have an 8" stainless steel liner in my chimney. The question I have is wondering how to attach my liner to the stove as the rod for the damper runs thru the top of the 8" opening. Is there an 8" insert boot that is missing from the stove?
 
Last edited by a moderator:
This inserts were meant to be directly installed into the firebox without a liner attached. Some call it a "slammer" installation. If you search, there are several "adapters" that can be attached to the top of the stove. However, if you intend to keep the dampener, some modification will be required. I have the same Fisher insert and just removed the dampener and welded a ring around the opening that I could attach the liner to.

[Hearth.com] Question About Early Fisher Wood Stove Insert

Sent from my iPhone using Tapatalk
 
Last edited:
Just get an 8" appliance adapter and cut notches out of it to allow that bar to go through it. Then slide it into the stove and attach it with some angle brackets. Dont give up that damper it does help keep a little more of the heat in the stove. They will never be all that efficient but why make it worse.
 
I want a Fisher insert for my house, the shop has a Grandpa and a XL.:)
 
Status
Not open for further replies.