Regency Greenfire GF55 Parts

[jcleary47]

So I was going to clean out my convection/combustion motors, and I'm under the impression that I should replace the gasket on the combustion motor if necessary.

Now I think I found the part I need in the manual (GF55-014) however I haven't been able to find this part on any site. I think the Greenfire GF55 is the same as the Enviro Meridian but I don't know if it uses the same gasket?

Regency doesn't seem to be a primary manufacturer on any site so I'm not sure what I'm supposed to search for when it comes to replacement parts.

 

[jtakeman]

Measure the gasket Outside Diameter. If its 5 3/4 the EF-012 should work.

(broken link removed to http://woodheatstoves.com/combustion-housing-gasket-circular-5-34-ef012-p-10016.html?cPath=328_748_335)

Check eBay, There are some for sale much less than the one I posted. Not sure if I can post the eBay link.

 

[imacman]

Measure the gasket Outside Diameter. If its 5 3/4 the EF-012 should work.

(broken link removed to http://woodheatstoves.com/combustion-housing-gasket-circular-5-34-ef012-p-10016.html?cPath=328_748_335)

$37 bucks??? WOW Most of the round comb. blowers gaskets are pretty standard. Give Eric at Kinsman Stoves a call with the diameter and # of holes and I imagine you can buy 2-3 gaskets w/ shipping for that price. He gives discounts to hearth.com members.

 

[jtakeman]

$37 bucks??? WOW Most of the standard comb. blowers gaskets are pretty standard. Give Eric at Kinsman Stoves a call with the diameter and # of holes and I imagine you can buy 2-3 gaskets w/ shipping for that price. He gives discounts to hearth.com members.

Eric doesn't Like Enviro stoves. So he probably doesn't stove parts for them.

 

[imacman]

Eric doesn't Like Enviro stoves. So he probably doesn't stove parts for them.

If you give him the size of the gasket, he'll sell it to you. I got gaskets for my 10-cpm from him, and he's not a big Englander fan either.

 

[jtakeman]

If you give him the size of the gasket, he'll sell it to you. I got gaskets for my 10-cpm from him, and he's not a big Englander fan either.

The mini could use the breckwell gasket IIRC. Maybe the same blower as the mini?