So this morning I turned the stove off, putting it in shut down mode at 5:00am. Got up to take the dogs out at 7:00 and it was STILL in shutdown mode! The stove was cold! I unplugged it. Any ideas? As always thank you for you insight.
Shut down Englander PDVC-25
- Thread starter Pweeny
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
I plugged it back in and it didn't do anything. 1 1 was displayed and I pressed off. I'm running it right now, god I hope it was a fluke. Ill keep you posted. Thank you
papa bears stove,
There are no snap discs on the PDVC they have a t/c as a temperature sensor.
Pweeny,
The next time you shut the stove down check to see if the probe is where it is supposed to be, undamaged, and that it is connected to the controller.
You might also want to call ESW.
There are no snap discs on the PDVC they have a t/c as a temperature sensor.
Pweeny,
The next time you shut the stove down check to see if the probe is where it is supposed to be, undamaged, and that it is connected to the controller.
You might also want to call ESW.
Thank you both but the last one was for Smokey, sorry could not read the entire text on my iPhone.
- Status
Similar threads
