First of all I want to say thanks to hearth.com for providing this message board for those people like me who are clueless! Secondly, I want to do my best to describe my trouble.
Turn on the stove, everything works great....30 seconds or so after the pellets start dropping, I have a tiny fire, then more pellets drop as they should....finally more pellets are dropping and there is a large flame.....the blower fan has not started....so I wait a few more minutes....no fan. Finally the pellets stop dropping and now they stove is shutting down...I have blinking lights on the control panel...the fan button lights are blinking on 2 and 5. The Stove shuts down and cools and here I am. This has been going on the last couple of days, the stove still will not operate properly.
I removed the convection fan tonight and powered it up...started and ran perfectly. I was all set to buy a new one, as the one I have for it is the older model that does squeek a tad on start up....but no sense in buying it yet at $259 from US Stove. There must be something else I can look at or replace that will cause this to work again...any ideas?
Turn on the stove, everything works great....30 seconds or so after the pellets start dropping, I have a tiny fire, then more pellets drop as they should....finally more pellets are dropping and there is a large flame.....the blower fan has not started....so I wait a few more minutes....no fan. Finally the pellets stop dropping and now they stove is shutting down...I have blinking lights on the control panel...the fan button lights are blinking on 2 and 5. The Stove shuts down and cools and here I am. This has been going on the last couple of days, the stove still will not operate properly.
I removed the convection fan tonight and powered it up...started and ran perfectly. I was all set to buy a new one, as the one I have for it is the older model that does squeek a tad on start up....but no sense in buying it yet at $259 from US Stove. There must be something else I can look at or replace that will cause this to work again...any ideas?
!
