Water column measurement

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
J

Jonesy6615

New Member
Nov 24, 2021
3
PA
Hello,

New to the forums here. I have an enviro p3 pellet stove and am having a hard time dialing in the water column measurement. I have a manometer and have the stove set to. 11-.12 per the manual spec, but regardless if I have the stove on 5 or 1 the measurement remains the same. Is that normal or should it drop down on the low setting?
 
I have been burning an Enviro stove for 20 years and have never achieved
what the manual calls for
Now I just set it by flame characteristics. Best vid I have found
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
  • Like
Reactions: Jonesy6615
You must log in or register to reply here.

Similar threads

J
Water column measurement
Replies
1
Views
629
The Pellet Mill - Pellet and Multifuel Stoves
Jonesy6615
J
J
Help with Quadrafire Outfitter II Soot/Black Glass with Pictures
Replies
5
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
Vinelife
Vinelife
Justin3356
Trouble with flame height, Jotul GF 160 DV
Replies
8
Views
2K
It's a Gas!
AdkAl
A
ylomnstr
St. Croix Hastings Advance Heat Button
Replies
0
Views
279
The Pellet Mill - Pellet and Multifuel Stoves
ylomnstr
ylomnstr
S
Enviro 28 stove starts up but then does not ramp to high heat, it keeps low
Replies
4
Views
551
The Pellet Mill - Pellet and Multifuel Stoves
sartorisan
S
Top Bottom
Back