WHITFIELD PROFILE BLOWER MOTOR

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

STUFFINEYE

New Member
Hearth Supporter
Nov 21, 2008
1
FREDERICKSBURG VA
My pellet stove blower only seems to work on one speed, of course the low speed. Pellets feed fine, the stove is firing up great. We have set the thermostat for 70 and it is stopping and starting great. The blower is just only blowing on one speed and it aint high. So normally, the temperature in the rooms downstairs will get anywhere from 78 to 79 degrees but now we can barely get 71 or 72 degrees running constantly due to the blower speed. Please anybody out there with any suggestions on where to start our troubleshooting would be greatly appreciated before we have to call a repairman out. The stove is 4 years old and was installed by professionals. Never had any problems with it until this year.


Thanks Stephanie
 
Status
Not open for further replies.