Anyone know where to find the Whitfield Scraper Rod Kit (14750014) or have instructions and/or special wrenches for less than $100?
Whitfield Scraper Rod Replacement Kit 14750014
- Thread starter milesvanren
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Stovensen
Minister of Fire
A couple of years ago forum member Don2222 made a very detailed thread on how to replace a broken scraper rod on a Whitfield Advantage. The replacement kit should fit both the Profile and the Advantage series, according to Don's thread.
Link to Don's thread:
www.hearth.com
And Don may know where to get the replacement kit. You could ask him in a pm on the conversations section on this site.
My Quest Plus is from 1998 and the scraper rod is a bit loose after many years of use. I fear the day it will come all off. A pair of pliers could do the job, but it will be messy.
Link to Don's thread:
Whitfield Advantage replacing & upgrading an old broken scraper rod
Hello This old Whit had many hidden horrors like a the ash pan latch with a broken base plate on the inside. Split in two but all it took was a little welding! Also the bottom left door hinge tab dangling by a thread but a little weld there and bingo, good as new! Now for the broken cleaning...
www.hearth.com
And Don may know where to get the replacement kit. You could ask him in a pm on the conversations section on this site.
My Quest Plus is from 1998 and the scraper rod is a bit loose after many years of use. I fear the day it will come all off. A pair of pliers could do the job, but it will be messy.
Similar threads
