i just cleaned stove and now it wont start. checked and cleaned the proof of fire snap switch.also cleaned burn pot ash try and all passageways.when i start the control board and ready light are green it starts and it feeds pellets into pot but when it comes to ignite i get error on the ready light of one short blink and one long which says it the vacuam switch. tried bybassing both the snap switch and vacuam switch with same error. i beleive it is the igniter but i dont want to start replacing parts that dont need to be replaced. also was wondering if there is a cheaper igniter switch out there as the ones i looked at are between 108 -128 dollars plus shipping. any ideas would be helpful as it is getting cold and the wife idoesnt like to be cold.