I was going to say the same thing.
My suggestion to Alan would be for this product to meet both of those needs (air mattress inflater/fire starter). Instant increase of the market place
That's a thought for FiAir 2.0!
Alan
I was going to say the same thing.
My suggestion to Alan would be for this product to meet both of those needs (air mattress inflater/fire starter). Instant increase of the market place
I've developed a hand-held, battery powered blower that gets campfires and wood-burning fireplaces blazing in about two minutes. I'm wondering if a tool of this kind would be of any interest for faster kindling of wood stoves. Any thoughts? We've just started a crowd funding campaign to manufacture it in America, but we need some advice on whether it would appeal to folks who burn wood or pellets in their stoves. If you want to see it in action (only if you feel like it) you can look at either our website (www.fiair.net) or our crowd funding site (www.indiegogo.com/fiair) Thanks for any opinions you can offer.
Might be a great tool to sweep it all under the carpet.I would be concerned with blowing ash out of the stove and into my family room. I'm a pig to begin with, I don't need help making a mess. That being said, I do hope things work out for you.
Haven't read all the posts here, but if it is forcing more air than the chimney is drawing naturally, then might not the exhaust gas/smoke will go somewhere other than the chimney? Should test that part out.
As the engineers might say "The goesinta should match the goesoutta"
I would be concerned with blowing ash out of the stove and into my family room. I'm a pig to begin with, I don't need help making a mess. That being said, I do hope things work out for you.
Might be a great tool to sweep it all under the carpet.
Might be handy for soldering fumes.
This is one of those things that I probably wouldn't go out and buy, but if I had one I would use every so often. I'd market it as a great gift for dads or whatever. Better than a neck tie.
1. You should be able to use FIAir with a wood stove door cracked just an inch or so to refresh a smoldering fire. The beauty of FiAir is that you don't have to stick your hand into the chamber. The airflow is strong enough that it should keep the smoke drafting away from the room. But we will be eager to test this.
Haven't read all the posts here, but if it is forcing more air than the chimney is drawing naturally, then might not the exhaust gas/smoke will go somewhere other than the chimney? Should test that part out.
As the engineers might say "The goesinta should match the goesoutta"
A woodstove with any heat left in it is most likely going to still have enough chimney draft to excite active coals by cracking the door. I have never been tempted to stick my head near the door opening on my stove for any purpose.
Along the lines of AP's post, if the chimney is keeping up with the little blower's output, then the blower probably isn't necessary to begin with.
Alan, In your trailer video we can all hear the wood hissing on that open fire. Unseasoned (or wood that is partially seasoned) wood is probably the cause of 75% the problems new stove owners face in building a fire. I see you've done some research here already but stick around and we'll have you setting off bonfires with a Bic in no time.
patents pending, post it on an internet forum, someone over in China is already mass producing these to flood the market before Christmas at....................
$9.99 and wait if you order now we'll send you another one for a small processing fee....................
actually been there done that good luck with it, I can see the casual burner using it out side for a fire pit but serious wood burners probably not
We use essential cookies to make this site work, and optional cookies to enhance your experience.