M55 Thermostat or controls

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

roadrunnermoore

Member
Hearth Supporter
Sep 23, 2010
58
Faulkner, Maryland
I have a M55 Cast Insert. Recently, on High-Low operation, the stove will run on high, get to temperature on thermostat, switch to low. Then for some reason, when the temp drops and the thermostat calls for more heat, the stove won't go back to High, stays on Low. Any ideas? Thanks
 
What do you have the anticapator set at?

Try turning the stat temp down and then back up. Could be stick contacts.
 
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.


This might help.
 
It says to set to 1.2 for millivolt. The M55 should work with millivolt stats. That is what I have on mine! If the .6 doesn't do it try the 1.2 setting.
 
  • Like
Reactions: roadrunnermoore
Status
Not open for further replies.