Our 2011 Accentra Insert we had installed last May so we are new to running it and still learning.
It has been running well on room temp mode.
My son forgot to put in pellets so it ran out and now are struggling to get it run and stay on. We have it set at 72 and our house is 60-62. It will start up and then turn off in 1-2 hours. I got it to do that twice today but now it won't light.
I've been playing around from room temp to stove temp.
Now it is flashing 5 times status; and combustion blower light is constantly lite. I tried unplugging it to reset it after letting it be for a couple hours and trying to restart it.No go...on stove temp it fed pellets but didn't start.
Setting right now are:
feed adjustment 3.5
room temp: high
ignitor is on auto
Turned up the temp to 80
I did check the sensor (not sure right word) and it had picked up a bunch of carpet lint on the end.
It's getting chilly and I don't want to turn on the furnace. Other side of the house pellet stove is keeping kitchen warm.
Thanks
It has been running well on room temp mode.
My son forgot to put in pellets so it ran out and now are struggling to get it run and stay on. We have it set at 72 and our house is 60-62. It will start up and then turn off in 1-2 hours. I got it to do that twice today but now it won't light.
I've been playing around from room temp to stove temp.
Now it is flashing 5 times status; and combustion blower light is constantly lite. I tried unplugging it to reset it after letting it be for a couple hours and trying to restart it.No go...on stove temp it fed pellets but didn't start.
Setting right now are:
feed adjustment 3.5
room temp: high
ignitor is on auto
Turned up the temp to 80
I did check the sensor (not sure right word) and it had picked up a bunch of carpet lint on the end.
It's getting chilly and I don't want to turn on the furnace. Other side of the house pellet stove is keeping kitchen warm.
Thanks