PDVC Question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

AAsTeapots

Member
Hearth Supporter
Oct 12, 2007
37
I have my stove set at 5&5;but it is waaaay toooo hot for us. I have tried different settings but the stove keeps going out (pellet overload and such). HELP! Any ideas what the best setting is to keep the room warm NOT so hot its like you are burning in hell.
 
You should push each button and just see what the settings are set at. The default is 6-4-1. If your settings are at the 6-4-1 and your stove is going out when you put it down to a lower setting such as 2-5 then there is something wrong. I changed my settings to 5-6-1 to slow down the consumption of pellets and to try and get a cleaner burn. I can run my stove on 1-3 with no problem.
 
My I changed my lower settings to 5-5-1 and run it on 1-2. It seems to keep the house around 71* through the night and doesn't cook us. I imagine when it gets colder will have to play with the settings again to find a good one.
 
Definitely play around with the Low Fuel Feed and Low Burn Air buttons to tune the stove when burning on settings 1 and 2. My settings are 3-8-1 to get a clean hot burn when on low. Each stove burns a little differently so don't be afraid to play around with it. The lower the LFF thw slower the pellets are fed in and the higher the LBA the more air is fed into the burn area.
 
AAsTeapots said:
I have my stove set at 5&5;but it is waaaay toooo hot for us. I have tried different settings but the stove keeps going out (pellet overload and such). HELP! Any ideas what the best setting is to keep the room warm NOT so hot its like you are burning in hell.


call my shop and discuss it with one of my techs. thats what i pay em for.
 
Mike I would love to but if your shop is the number on my manual FORGET IT! I cant get thru!!!
If there is an alternate number I am willing to try again... Oh and by the way... great video... your a star!!! :)
 
AAsTeapots said:
Mike I would love to but if your shop is the number on my manual FORGET IT! I cant get thru!!!
If there is an alternate number I am willing to try again... Oh and by the way... great video... your a star!!! :)

call right at 10am eastern , phone traffic is not too busy on saturdays , also call the 800-516-3636 number if the regular number doesnt get you through
 
Status
Not open for further replies.