DVL connector part# 8674 - how to connect to DuraTech ?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

pglotov

Member
Aug 9, 2009
32
SF bay area
Hi All, I've been struggling with connecting DVL connector (part# 8674) to class A chimney, The double wall pipe side of the connector fits nicely into the double wall pipe. But it would only slide over a chimney section inner liner, not inside it how I thought it should work, engaging connector notches sticking outward. Then I read somewhere that DuraTech finishing collar is necessary for the connector to hook up to. I bought finishing collar, and yesterday tried to squeeze the connector into the finishing collar. It didn't fit, so I tried to crimp the connector, it would fit in but wouldn't sit there securely. I pretty much destroyed the connector with crimping, and have ordered a replacement. But I still have no clue how to properly get the connection between the connector and chimney finishing collar. Could someone help ? Thanks.
 
show some pictures.. so i can understand
 
It goes in the support just like you described. It is a dripless connector so it goes too the outside of the inner liner.Give it a littl twist to lock it in place. Good luck.
 
I had/have the same problem. It's definately the weak link in my system.
I reach inside the pipe with both hands and push toward the class A and then turn to lock the tabs.
It never feels like it's quite right but if it won't pull back out I leave it. It's even more fun after it's full of soot.
It also draws a bit of air. That results in some extra buildup in that area. I wish there was a better way to make
that connection.
 
Status
Not open for further replies.