10-CPM install

[ghandy131]

We're arranging an install for our new 10-CPM. The house is 6" construction (issue). The stove needs to be 6" from rear wall per manual. According to code, can't have a seam inside the wall. Planning on horizontal run out the house and a 5' vertical. I want to keep the outside verticle run at 3" from outer wall. Planning on ordering Duravent corn pipe as recommended by Englander. Any experienced pellet pros have any idea on what I should order?

 

[imacman]

You're going to have to do some math calculations for the horizontal part.

You need an appliance adapter, the correct length piece(s) to get through the wall, a thimble with air intake port, a cleanout T, 5' of pipe for the vertical, 2 adjustable brackets to mount to exterior to hold the pipe, and a round cap.

Have you decided where you're going to get the pipe? here are 2 great places to try:

www.dynamitebuys.com/store/cart.php?m=product_list&pageNumber=1&c=213&v=&sortBy=undefined&search;=

Great company, and free shipping on all orders


www.kinsmanstoves.com

If you call Eric at Kinsman, use the Brookfield number, and tell him your a Hearth.com member....great guy to do business with.