Anybody have a good design for a Sawhorse

Post in 'The Gear' started by michaelthomas, Aug 2, 2008.

Thread Status:
Not open for further replies.
  1. michaelthomas

    michaelthomas
    Expand Collapse
    New Member

    Joined:
    Feb 10, 2006
    Messages:
    286
    Likes Received:
    0
    I made a saw horse a few years back for the 1-3" stuff. Just pile it in and cut. It has since fallen apart and subsequently been burned. i have about a cord of the small stuff to get through and need to build a new saw horse thing. Before I build it I was wondering if anybody had a good design for one before I reinvent the wheel.
     
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!





  2. savageactor7

    savageactor7
    Expand Collapse
    Minister of Fire

    Joined:
    Jan 25, 2008
    Messages:
    3,708
    Likes Received:
    10
    Loc:
    CNY
    I bet you could Google one real quick...lots of sites have those mini wood DIY wood projects plans. Good luck.
     
    Collapse Signature Expand Signature
  3. begreen

    begreen
    Expand Collapse
    Mooderator
    Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    59,205
    Likes Received:
    7,340
    Loc:
    South Puget Sound, WA
    I think you mean a saw buck. Basically it's a pair of Xs with a couple horizontal joiners.
     
    Collapse Signature Expand Signature
  4. BrotherBart

    BrotherBart
    Expand Collapse
    Hearth.com LLC Mid-Atlantic Division
    Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    32,184
    Likes Received:
    9,465
    Loc:
    Northern Virginia
    Collapse Signature Expand Signature
Thread Status:
Not open for further replies.

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information