1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)

Astroflamm Integra 1995

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by Doug B, Oct 22, 2008.

Thread Status:
Not open for further replies.
  1. Doug B

    Doug B New Member

    Joined:
    Oct 22, 2008
    Messages:
    3
    Loc:
    Washington State
    I hare this insert. The convection fan runs on high all the time. The only way to stop it is to unplug the stove. All the other controls, fans, auger works. I have put in a new control board and low limit switch.
    Any suggestions?
    Doug size=3][/size]

    Helpful Sponsor Ads!





  2. crausch

    crausch New Member

    Joined:
    Aug 26, 2008
    Messages:
    747
    Loc:
    Littlestown, PA
    This probably won't help much but on the site:

    http://pelletstoverepair.com/

    ...there is a Integra troubleshooting guide. It says that if any motor runs full speed when you first turn it on do one of two things:

    1. Replace the control board. (which you have already done)
    2. Check the motor wiring.

    They do say to feel free to email or phone them if you have any questions.
  3. Doug B

    Doug B New Member

    Joined:
    Oct 22, 2008
    Messages:
    3
    Loc:
    Washington State
    Thanks for the heads up, sounds like the fan is next!
    Doug
Thread Status:
Not open for further replies.

Share This Page