Austroflamm got me stumpped

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by smwilliamson, Mar 15, 2013.

  1. smwilliamson

    smwilliamson
    Expand Collapse
    Minister of Fire

    Joined:
    Dec 28, 2009
    Messages:
    4,469
    Likes Received:
    772
    Loc:
    Southcoast, MA
    Auger continually feeds. The auger turns ever so slightly all the time and then pluses to a stronger turn every time the control energizes. Swapped out the mother board and adjusted the feed trim. Thinking that the daughter board controller is to blame here, any thoughts?
     
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!





  2. heat seeker

    heat seeker
    Expand Collapse
    Minister of Fire

    Joined:
    Feb 25, 2011
    Messages:
    2,579
    Likes Received:
    381
    Loc:
    Northern CT
    Sounds like a leaky triac or driver to me. Is the triac on the daughter board?
     
    Collapse Signature Expand Signature
    jtakeman likes this.
  3. MountainSean

    MountainSean
    Expand Collapse
    Credo Quia Absurdum

    Joined:
    Sep 29, 2011
    Messages:
    342
    Likes Received:
    61
    Loc:
    Tonopah, NV
    Daughter board. Just had a customer with a very similar problem which for that is generally always either the daughter board or the control board and you already tested the control board.
     
    Collapse Signature Expand Signature

Share This Page