My Breckwell pellet stove starts the blower fan before the fire starts this year. last year stove would get hot then fan would kick on. what is the cause of this please.
thanks
thanks
Breckwell pellet stove blower issue
- Thread starter frontier
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Owen1508
Minister of Fire
Room fan? Try the High temp thermo disc reset. It's the disc that is attached to the top rear of the outside of the firebox. it will have a red reset button on it. Press 3-5 secs that should reset it. If it will not reset(that doesn't work) by pass the switch by taking the to lead wire(make sure you unplug the stove 1st for safety) and join them together. Either with a jumper wire or a small metal paperclip will work too. If that works then replace the disk. Let me know how you make out.
Owen1508
Minister of Fire
- Status
