Adabiviak
Feeling the Heat
I've been using the same 14" Craftsman chainsaw for around 15 years... got it at Orchard for like $75.
For limbing and small stuff I have a el cheapo Poulan Wood Shark with a 14" bar.
---snip---
My main "go-to saw" is a Stihl MS-290. No complaints about that either, and I know that saw will probably last as long as I feel like cutting, which is the reason I bought it. It was a bit to heavy (and overkill) to use for smaller stuff, which is why I picked up the cheap Poulan.
I've noticed quite a few bike geeks here /maybe we all can post pics of our stables in the appropriate place sometimeLove the fact that I have a Stihl dealer 5 minutes away and that they take care of warranty issues, and odd things that came up, so far, no charge. I'm an OK bike mechanic for an editor, but saws are still new territory for me. my bike doesn't have a carburettor ... but wait...
View attachment 97803![]()
My Wife found mine in the garage about a week after I bought it
She said "When did we get a splitter?"
I said "We've had that for awhile"
She said "We didn't buy a splitter. You bought a splitter and didn't tell me!!"
It's a purchase I have never regretted. Certain tools demand more money. Some not so much. But something I use often, I will buy quality. (In the case of chainsaws, it's quality and QUANTITY!)[/quote
when i bought "our'' JD2320 she said you don't need that loader ,you can get it sometime later .All we really need is the mower.
she now understands the error of her ways .That bucket has been used & used &used, she now is also a total tool geek(she loves good knives)
she has more hours on the JD than I do
A good tool is a joy to use
I've noticed quite a few bike geeks here /maybe we all can post pics of our stables in the appropriate place sometime
I guess I kinda like my saw cos I keep on trying find wood to feed itand jobs for it to do.
As for the size of saw. Yes, you're right 40+cc and 18" bar is a bit of a slog in a big piece of wood, but as this saw beds in, I'm more amazed at it's thirst for cutting. It must be fun to use or I wouldn't keep bringing it logs to have it's way with. I don't cut bigger than I can carry, so 18" is about as big is I'll scrounge.
In retrospect I might have gone with a MS 290 for just a little more dough, then I could have had an excuse to get a small saw toobut the good thing about a 45cc is it's light enough for most anything, and if it's in the van it's big enough to be a 1-saw do-all for a h/o scrounger. But let's face it who "wants" just one saw? [Needs is a completely different story ... I read someplace everybody needs a backup saw, so that's just for starters, I guess heh heh. ]
My Wife found mine in the garage about a week after I bought it
She said "When did we get a splitter?"
I said "We've had that for awhile"
She said "We didn't buy a splitter. You bought a splitter and didn't tell me!!"
It's a purchase I have never regretted. Certain tools demand more money. Some not so much. But something I use often, I will buy quality. (In the case of chainsaws, it's quality and QUANTITY!)
Dex, did you edit out the part about the John Deere 2320? I was initially looking at the 2720, but have come to the conclusion that I need a loader with more lift capacity so it is going to end up being the 3720. Would love the 4000 series, but that would just looked retarded on my 2 acres. My wife is actually alright with the purchase. I had been looking at tractor when we were looking at 6 acre lots so she got over the sticker price pretty quickly. My in-laws about had a heart attack when they found out a tractor can cost as much as a car. The backhoe will have to wait another year though. Don't think I myself can swallow the tractor, loader, and backhoe cost all in one shot. We need to put in french drains and some serious drywells because the backyard is a swamp when it rains. The tractor and attachments should pay for most of themselves just with all that work. Then we are looking at a 40x40 addition to the house that needs to be excavated slightly. More money in the bank.
Thing is, I already went with a ZTR for mowing. Getting ready to order a bench grinder for the main reason of sharpening the blades on the ZTR. Sharpen the blades a couple of times and the grinder will have paid for itself. I ran the bench grinder and a workbench by my wife this morning and she didn't even ask "How much?".
Fabs, I used to sell the damn things so I have a couple pointers for ya.
If you want a backhoe, get it when you purchase the tractor if at all possible. They are not cheap attachments and implements purchased with the machine qualify for the same finance incentives that the rest of the machine does. I know you might be planning to pay cash but John Deere Credit usually has some decent short-term finance plans available that involve very low or no interest. If you plan to purchase your implements over a 1-2 year period anyways, you'll typically save very little by paying cash out-of-pocket vs a 6, 12, or 24 month no interest finance plan.
Think the backhoe purchase through carefully. Most buy one with 2 or 3 different projects in mind and then the 'hoe rarely gets used if ever. Even though nothing boosts resale value like a backhoe, they are $7-$9K dollar investments. That equates to more than a few weekend rentals of a mini-excavator that will dig circles around (and under!) the 'hoe and you do not have to store it. Think of all the other 3pt hitch/loader gear you could have with that money. (Chipper, log grapples, pallet forks, brush/grapple buckets, etc) Hell, you could go for a cab tractor (Heat, AC, Radio, 'nuff said!), rent the excavator for the weekend to do the back yard, and still come out way ahead.![]()
Yeah, we are planning to pay cash. That is why the damn thing isn't already sitting in the yard. I hate debt. Also want to have a stand alone garage built before I get the tractor so I have somewhere to keep it. Yep, the backhoe is around $8k. Thing is, the project is not going to be a weekend project. I need to put french drains around 3 sides of the house. Then, I need to set up the drywells. Then, I am thinking about putting in a small pond where the storm water drains into the backyard. Then, I am thinking about stepping down a hill with pavers and planting flowers all around it. Then I am going to rip out the 200 foot long driveway and put in a cement pad at the top and in front of the garage with pavers everywhere else. Then I am going to rip out the cement patio out back and put in pavers with a firepit and outdoor kitchen. Then, I am going to buy a farm at some point here. I can see a ton of work for the backhoe over many summers. I'll have to take a look at what an excavator would cost to rent, but from what I have seen at the rental places I would rather buy the backhoe and then sell it if I decide I don't need it anymore. Guessing I would still come out ahead if I did that.
Also thought about getting a cab on it, but then thought twice about it because it would make it harder to use in the woods. Bad enough getting that size tractor into the woods as it is. It would be even harder with a cab.
Ok, I fold - You got work for that 'hoe to be doin.![]()
when i bought "our'' JD2320 she said you don't need that loader ,you can get it sometime later .All we really need is the mower.
she now understands the error of her ways .That bucket has been used & used &used, she now is also a total tool geek(she loves good knives)
she has more hours on the JD than I do
A good tool is a joy to use
Bikes, dogs with some border collie genes, wives with a quick temper, what's not to like? ... only yours seems to prefer beer while mine prefers the aroma of a fine single malt...the nosey dog that is.
No. I didnt edit anything. Member Jack Fate above made the comment
, but the "quote" was messed up and appeared as if I wrote it.
I was looking at tractors w/ FEL's last Summer but settled on a Dixie Chopper Excalibur 3374 (Worlds Fastest lawn mower
I could use the FEL, but at the end of the day, I wouldn't be able to bear sitting on it for 5 hrs cuttim grass (I was gonna get a 72" finish deck). The Dixie takes about an hour to cut the 4 acres (have a little over 7). Maybe in a couple more years I will revisit the idea of a SCT.
(I looked hard at the ZatR, but in the end. The Dixie won my heart)
At 6 acres an hour, I too would have gone with the Dixie. Had no idea they even existed. It takes me almost an hour to cut my 2 acres with the ZTR445 Thankfully, I only have 2 acres. Been using the mower to tow stuff too, but am guessing that the Dixie could do that too.
Its definitely a nice machine.
I think the brochure said something like 8 acres an hour (flat ground, no obstacles, professional driver) and could do a football field in 5 minutes.
My last mower was a 54" Cub Cadet Zero Turn w/ 24 HP Kohler. It took about 3 hours to cut the same 4 acres. With a 20" wider deck and double the speed, it takes 66% less time now. The deck has 6 blades on it. 2 on each jackshaft. One is the standard blade, the other is called a Twist Blade. For the price (starts around $12-$13k) they are well worth it. IMO
View attachment 97961 View attachment 97962
Its definitely a nice machine.
I think the brochure said something like 8 acres an hour (flat ground, no obstacles, professional driver) and could do a football field in 5 minutes.
My last mower was a 54" Cub Cadet Zero Turn w/ 24 HP Kohler. It took about 3 hours to cut the same 4 acres. With a 20" wider deck and double the speed, it takes 66% less time now. The deck has 6 blades on it. 2 on each jackshaft. One is the standard blade, the other is called a Twist Blade. For the price (starts around $12-$13k) they are well worth it. IMO
View attachment 97961 View attachment 97962
OK, since we're talking blades and mowers - I'll throw this in. Not trying to get into a brand discussion here...I've ran them all and they all have their pro's and con's.
When I bought my house a few years back I had a box store riding "tractor"...and I use that term very loosely. It worked fine at the old house's 3/4 acre yard. New place has 3 acres of yard and I figured, if I really hustled, I could mow the 3 acres in about 4-5 hours. That wasn't going to cut it (bad pun alert). As luck would have it we qualified for the "upgrade home-buyer" credit they had going a few years ago and I dropped all that money on a commercial ZTR. I am now able to mow my yard in just under an hour...so ~4 times as fast. I put about 80 hours on the mower the year before last (last year only 20 because of the wicked drought) so I figure that purchase saved me at least 200 hours of mower seat time in one year. Not a bad investment....especially when I'll be mowing this yard for the next umpteen years. I wasn't willing to give up every Saturday AM into perpetuity mowing grass, nor did I want to give up my yard space for the kids to romp around in.
I used to mow commercially and probably have upwards of 3,000 hours of seat time on a (not including mowing my own yard and my parent's yard growing up). With all that time I've sharpened a LOT of mower blades. A bench grinder is not my weapon of choice. I prefer to use a heavy duty angle grinder with the mower blade mounted in a vise. This is 100% personal preference but I can put a better edge and angle on a blade free-handing it. Maybe I'm just weird like that, but wanted to throw it out there.
That being said, every respectable shop should have a bench grinder. I have a WW2 era monster that takes two men and a boy to lift up to the bench. I'm the third generation to use it and I have no doubt I'll hand it down to one of my boys someday.
Oh, and the acres per hour "metrics" are a complete hoax. Unless you plant grass on an airport runway...you aren't getting 6 acres per hour. Just sayin'. They are pretty good at making comparisons for different speeds and deck sizes though.
Anyway, to bring it back around to the original topic. Nope, didn't need a high $ commercial mower. Yup, some of the best money I ever spent.
Its definitely a nice machine.
I think the brochure said something like 8 acres an hour (flat ground, no obstacles, professional driver) and could do a football field in 5 minutes.
My last mower was a 54" Cub Cadet Zero Turn w/ 24 HP Kohler. It took about 3 hours to cut the same 4 acres. With a 20" wider deck and double the speed, it takes 66% less time now. The deck has 6 blades on it. 2 on each jackshaft. One is the standard blade, the other is called a Twist Blade. For the price (starts around $12-$13k) they are well worth it. IMO
View attachment 97961 View attachment 97962
OK, since we're talking blades and mowers - I'll throw this in. Not trying to get into a brand discussion here...I've ran them all and they all have their pro's and con's.
When I bought my house a few years back I had a box store riding "tractor"...and I use that term very loosely. It worked fine at the old house's 3/4 acre yard. New place has 3 acres of yard and I figured, if I really hustled, I could mow the 3 acres in about 4-5 hours. That wasn't going to cut it (bad pun alert). As luck would have it we qualified for the "upgrade home-buyer" credit they had going a few years ago and I dropped all that money on a commercial ZTR. I am now able to mow my yard in just under an hour...so ~4 times as fast. I put about 80 hours on the mower the year before last (last year only 20 because of the wicked drought) so I figure that purchase saved me at least 200 hours of mower seat time in one year. Not a bad investment....especially when I'll be mowing this yard for the next umpteen years. I wasn't willing to give up every Saturday AM into perpetuity mowing grass, nor did I want to give up my yard space for the kids to romp around in.
I used to mow commercially and probably have upwards of 3,000 hours of seat time on a (not including mowing my own yard and my parent's yard growing up). With all that time I've sharpened a LOT of mower blades. A bench grinder is not my weapon of choice. I prefer to use a heavy duty angle grinder with the mower blade mounted in a vise. This is 100% personal preference but I can put a better edge and angle on a blade free-handing it. Maybe I'm just weird like that, but wanted to throw it out there.
That being said, every respectable shop should have a bench grinder. I have a WW2 era monster that takes two men and a boy to lift up to the bench. I'm the third generation to use it and I have no doubt I'll hand it down to one of my boys someday.
Oh, and the acres per hour "metrics" are a complete hoax. Unless you plant grass on an airport runway...you aren't getting 6 acres per hour. Just sayin'. They are pretty good at making comparisons for different speeds and deck sizes though.
Anyway, to bring it back around to the original topic. Nope, didn't need a high $ commercial mower. Yup, some of the best money I ever spent.
Other than a washer and dryer that were not in the house when we bought it (i.e., it was a foreclosure), the next thing that was ordered was the ZTR. I knew before we even bought this house that I did NOT want to mow grass all weekend. Was looking at mowers and tractors years before we even bought this house while we were "just looking".
Don't have an angle grinder yet, but could probably use my Dremel with the same process. Bought the bench grinder because it is something I have wanted. Going to give the blades a go with the bench grinder and see how it goes. If it is a PITA, I will try the Dremel. If that is a PITA, I will buy an angle grinder and give that a shot.
Too clean...why am I surprised?