Thread Status:
Not open for further replies.
  1. philbrick

    philbrick
    Expand Collapse
    Member

    Joined:
    Mar 20, 2011
    Messages:
    101
    Likes Received:
    0
    Loc:
    chicopee ma
    How far does your damper rod pull out from side of stove?
     
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!





  2. nailed_nailer

    nailed_nailer
    Expand Collapse
    Minister of Fire

    Joined:
    Oct 29, 2007
    Messages:
    855
    Likes Received:
    127
    Loc:
    Cape Cod, Ma
    phil,

    I have an EF-2 FS

    Basically the same stove I think. (correct me if wrong)

    If I measure from the sheet metal side wall to the end of the black knob....

    In= 2-1/4"
    Out=4"

    I usually run the stove with it pulled out to about 2-1/2"

    But I adjust it based on the fire.

    Good Luck,
    ---Nailer---
     
    Collapse Signature Expand Signature
Thread Status:
Not open for further replies.

Share This Page