THELINMAN3000 said:
.....how about the control board's mode. Unplug it and plug it up and hold the up arrows???????????? I saw this a long time ago but I can't remember. What letters will come up C OR P or something else?........
If you're referring to the "C" or "D" modes mentioned on this forum by people that have PDVC or PDV stoves, I don't know that the 10-cpm has those codes in the control board. And even if they did, I wouldn't mess with it.
My 10-cpm is running with whatever the factory set it at. Just make sure the stove is set for pellets.
If you're not sure about it, and want to re-set the board to the factory default settings, the procedure is:
1. Unplug, and then plug the power cord back in.
2. Within 5 seconds, press ALL 3 bottom buttons
at the same time and release. The display should go to "F 5", and then eventually turn off.
At this point, you should check to make sure the stove is in pellet or corn mode, depending on which one you want.
3. Reset bottom 3 buttons to original setting (3-5-1). Let all lights on control board go out, and then restart the stove.