when have settings at 3-4-1 or 4-4-1 as per tech support fire will go out for about 15-20 sec and relight at that time when fire is out will
get a light smoke smell
have to go to 5-5-1 to keep fire from going out and no smell top is set at 1-4
have new gaskets on the blowers stove was mfg 10-2010 have used 8 bags of pellets
vent out side wall 2 ft then a 45 up 3ft & a 45 then cap all 4in sillcone & aluminum tape
when at the 4-4-1 or 3-4-1 setting get a light gray dust in room not at the 5-5-1 setting
will i just have to run on the 5-4-1 setting like to used the lower setting so not get so hot in the room where stove is
get a light smoke smell
have to go to 5-5-1 to keep fire from going out and no smell top is set at 1-4
have new gaskets on the blowers stove was mfg 10-2010 have used 8 bags of pellets
vent out side wall 2 ft then a 45 up 3ft & a 45 then cap all 4in sillcone & aluminum tape
when at the 4-4-1 or 3-4-1 setting get a light gray dust in room not at the 5-5-1 setting
will i just have to run on the 5-4-1 setting like to used the lower setting so not get so hot in the room where stove is