Enviro Mini; Question/Favor

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by kast, Dec 3, 2008.

Thread Status:
Not open for further replies.
  1. kast

    Expand Collapse
    New Member

    Sep 28, 2008
    Likes Received:
    Stoughton M.A
    I think my control board isn’t functioning properly on the low setting’s, every auger trim setting seems to move the auger at the same rotation time, and it seems fairly long between.

    I was wondering if another MINI owner could throw there stove on low (1) just try the default auger trim setting and let me know how much time passes between auger turns. If you have, the time and want to try the other two trim settings for me that would be great, but not necessary.

    Currently I get about a 9-seconds count between auger turns on each of the three trim settings. While I’m not sure 9 isn’t right (it could be right), though it does seem odd that the trim doesn’t seem to effect the time interval like the manual says.
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!

Thread Status:
Not open for further replies.

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information