I bought a chimney liner kit and i think its the wrong one.It says its for oil fired alliance's.Z Flex Model "OS".
Can this be used or is there one for wood heat???
Thanks John
Can this be used or is there one for wood heat???
Thanks John
BeGreen said:It does sound like you got the wrong product. It is for lower temp applications:
Z-FLEX “OS” CHIMNEY LINER
The Z-Flex Flexible Liner is intended for use as a chimney liner in masonry
or pre-fab metal chimneys for oil burning appliances listed for use with type
L vents, gas burning appliances equipped with draft hoods or listed with type
B gas vents or listed solid fuel pellet fi red appliances whose continuous gas
temperature does not exceed 570° F.
• Z-Flex Flexible
BeGreen said:I think it's the SF product. Did you already install the kit?
BeGreen said:OK, that's good news. You're not screwed and caught it in time. Good that you checked.
BeGreen said:They should have a top of the flue cap, but I don't think you'll find one including a damper-seal (block-off plate).
BrotherBart said:Cost is going to depend on length of the pipe, how thick the liner material is etc. You can get one for around five hundred. The three liners I have bought online arrived in two days. They are shipped from the distributors warehouses around the country. Same thing your local dealer will do.
You can make a block off plate from an eight buck piece of sheet metal in the duct work department at Lowe's.
BrotherBart said:One piece. All the way down.
firebird400 said:wait is a good thing can save your self 300.00 to 400.00 bucks and it comes in two days buy online
BrotherBart said:firebird400 said:wait is a good thing can save your self 300.00 to 400.00 bucks and it comes in two days buy online
You betcha. The dealer is going to order it from Olympia or National Chimney Supply and get it in a couple of days also. And get a pretty penny for his light bill, water bill, rent and the phone call to the 800 number. Can't blame him. His kids gotta eat too and he has to pay the bills.
I buy all of my piping needs from my local stove shop except liners. He likes me. When I get the wrong thing I figure it is my fault and eat it instead of returning it.
Hogwildz said:According to their website:
All Fuel Stainless Steel Kit
Part Number: 2ZFLKIT
Stainless Steel liner kit for oil, gas, pellet, and wood. Available in 2", 3", 4", 5", 5.5", 6", 7", 8", 9", 10" diameters. Kit must be insulated for wood burning applications. larger diameters available upon request.
http://www.novaflex.com/productcart/pc/viewPrd.asp?idcategory=117&idproduct=400
Stainless Steel Chimney Liner Kits For Oil,Gas & Pellet Stoves
Part Number: 2OILKTX
Available In 3", 4", 5", 5.5", 6", 7", 8", 9", 10" Larger sizes available upon request. Alloy 316 Titanium. Patented airtight triple lock construction is tested and listed by UL
http://www.novaflex.com/productcart/pc/viewPrd.asp?idcategory=38&idproduct=399
Make sure you use the right one & there is no miss communication.Can get confusing as I am sure each dealer assigns their own part # to the same product.
Valhalla said:Just return the pipe for exchange or credit. If retail, just go to the guy that sold it to you for an exchange. Reseal the boxes first.
Hogwildz said:According to their website:
All Fuel Stainless Steel Kit
Part Number: 2ZFLKIT
Stainless Steel liner kit for oil, gas, pellet, and wood. Available in 2", 3", 4", 5", 5.5", 6", 7", 8", 9", 10" diameters. Kit must be insulated for wood burning applications. larger diameters available upon request.
http://www.novaflex.com/productcart/pc/viewPrd.asp?idcategory=117&idproduct=400
Stainless Steel Chimney Liner Kits For Oil,Gas & Pellet Stoves
Part Number: 2OILKTX
Available In 3", 4", 5", 5.5", 6", 7", 8", 9", 10" Larger sizes available upon request. Alloy 316 Titanium. Patented airtight triple lock construction is tested and listed by UL
http://www.novaflex.com/productcart/pc/viewPrd.asp?idcategory=38&idproduct=399
Make sure you use the right one & there is no miss communication.Can get confusing as I am sure each dealer assigns their own part # to the same product.