1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)

Need help with st. croix auburn

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by bkeys, Jan 24, 2008.

Thread Status:
Not open for further replies.
  1. bkeys

    bkeys New Member

    Joined:
    Jan 24, 2008
    Messages:
    1
    Loc:
    nebraska
    Hello, I have a auburn that is not running right. When starting up it runs for 15 seconds then shuts down and the #2 diagnostic light pops on. I have totally cleaned everything. Pipe and took off back panels and cleaned out all fans and lint. The manual says that it could be a vacuum problem so I replaced seals on door and ash pan. any help would really be appreciated. the thing would decide to quit when we are having a week below zero.
    Thanks

    Helpful Sponsor Ads!





  2. Xena

    Xena Minister of Fire

    Joined:
    Nov 30, 2005
    Messages:
    2,491
    Loc:
    South Shore MA
    You might get a better response about that stove
    on the iburncorn forum. There's several people over
    there who run them. http://forum.iburncorn.com/
    You'll find stoves separated by MFG over there.
    Eventemp/St Croix is in the fourth folder up from the bottom
    of the page.
Thread Status:
Not open for further replies.

Share This Page